Yamaha PSR-540 - Manual (Page 111)

111
MIDI Functions
109
Connect the serial port of the personal computer (RS-232C terminal or RS-422 termi-
nal) to the TO HOST terminal of the PSR-540.
For the connection cable, use the cable below (sold separately) that matches the
personal computer type.
Connect using the TO HOST terminal
● IBM-PC/AT Series
Connect the RS-232C terminal on the computer to the TO HOST terminal on the
PSR-540 using a serial cable (D-SUB 9P
→ MINI DIN 8P cross cable). Set the
PSR-540 HOST SELECT switch in the “PC-2” position.
When using a D-SUB 25P
→ MINI DIN 8P cross cable, connect using a D-SUB
9P plug adaptor on the computer side of the cable.
● Macintosh Series
Connect the RS-422 terminal (modem or printer terminal) on the computer to the
TO HOST terminal on the PSR-540 using a serial cable (system peripheral
cable, 8 bit). Set the PSR-540 HOST SELECT switch in the “Mac” position.
Set the MIDI interface clock in the sequencer software you are using to 1 MHz.
For details, carefully read the owner’s manual for the software you are using.
For details about the necessary MIDI settings for computer and sequence soft-
ware you are using, refer to the relevant owner’s manuals.
• Macintosh is a registered trademark of Apple Computer, Inc.
• IBM PC/AT is a trademark of International Business Machines Corp.
• Other company names and product names, etc. in this manual are registered trademarks or trademarks of those companies.
mini DIN 8-pin
D-SUB 9-pin
PSR-540
mini DIN 8-pin
D-SUB 25-pin D-SUB 9-pin
PSR-540
mini DIN 8-pin mini DIN 8-pin
PSR-540