Yamaha PSR-540 - Manual (Page 60)

60
Disk Operations
Format
Setting up commercially available floppy disks for use with PSR-540 is called format-
ting.
This function is useful for quickly deleting unnecessary files from an already formatted
disk. Be careful when using this operation, since it automatically deletes all data on
the disk.
• After formatting, the capacity
of a 2HD disk is 1 MB and
that of a 2DD disk is 720 KB.
1
Insert the floppy disk into the disk drive.
When a (new) blank disk or an incompatible disk is inserted “Unformatted”
will be displayed on the screen. In this case, press the [EXIT] button to show
“Format OK?” and then simply follow the procedure 5 below.
2
Press the [UTILITY] button.
• When the floppy disk’s write-
protect tab is set to ON
(page 58) or the disk is a
purposely “copy-protected”
disk, an alert message
appears indicating that the
Format function is not
possible.
3
Select “Format”.
Use the data dial, the [+/YES] button or the [-/NO] button.
CAUTION
• If data is already saved on
the disk, be careful not to
format it. If you format the
disk, all the previously
recorded data will be
deleted.
• While formatting is in
progress, never eject the
disk or turn off the power
to the PSR-540.
• If a disk that cannot be
read by the PSR-540 is
inserted into the disk
drive, it will be treated the
same as an unformatted
floppy disk. Take care not
to erase important data by
accidentally formatting a
disk.
4
Press the [NEXT] button to display the FORMAT operation
screen.
5
Execute the Format operation.
Press the [+/YES] button to execute the Format operation.
Press the [-/NO] button to abort the Format operation.
Save
You can save PSR-540 User styles, User pad (banks 37-40) and Registration Memory
data (banks 01-16) to floppy disks.
• When the floppy disk’s write-
protect tab is set to ON
(page 58) or the disk is a
purposely “copy-protected”
disk, an alert message
appears indicating that the
Save function is not possible.
1
Insert the floppy disk into the disk drive.
2
Press the [SAVE] button.
Menu=Format
Format OK?
Sv Type=All
The Format operation is completed...
Executing 49%
Completed
58