FIAT Bravo User Manual

Page 40

DISPLAY FUNCTIONS

(see Multifunction display or Reconfigurable
multifunction display)

Lighting (Interior car lighting adjustment)
(with side lights on only)

With the side lights on, this function is used to set
the brightness of the instrument panel, radio
controls and automatic climate control system
controls (for versions/markets, where provided) to
8 levels.
Proceed as follows to adjust the brightness:
❒ briefly press the MODE button: the previously

set level flashes on the display;

❒ press button or to set the required

brightness level;

❒ press the MODE button briefly to return to the

menu screen or hold the button down to return
to the standard screen without memorising.

Speed Beep (Speed limit)

This function is used to set the car speed limit
(km/h or mph); the driver is immediately alerted
when this limit is exceeded (see “Warning lights
and messages” chapter).
To set the desired speed limit, proceed as follows:
❒ briefly press the MODE button: the display

will show the wording ("Speed Beep");

❒ press button or to select speed limit

activation ("On") or deactivation ("Off");

❒ if the function has been activated ("On"), press

the

buttons to select the desired speed

limit and then press MODE to confirm.

Note The speed may be set in the range from 30 to
200 km/h, or from 20 to 125 mph according to
the previously chosen unit (see “Setting the
distance unit (Unit)” described below). The setting
will increase/decrease by five units each time button

is pressed. Hold down the

button to

automatically increase/decrease the setting rapidly.

GETTING TO

KNOW YOUR CAR

SAFETY

STARTINGAND

DRIVING

WARNINGLIGHTS

ANDMESSAGES

INANEMERGENCY

SERVICINGAND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX