FIAT Bravo User Manual

Page 38

SETUP MENU

The menu fig. 27 comprises a series of functions
arranged in a cycle which can be selected through
buttons

and

to access the different selection

and setting options (setup) given in the following
paragraphs. A submenu is provided for some
options (Time adjustment and Unit of
measurement).
The setup menu can be activated by pressing the
MODE button briefly.
Single presses on buttons

will scroll through

the setup menu options. Operating modes are
different according to the characteristics of the
option selected.
If the Radionavigator system is installed, only the
following functions can be adjusted/set from the
instrument panel:
"Lighting," “Speed beep” and "Headlight sensor" (for
versions/markets, where provided), "Belt buzzer"
and "Passenger airbag". The other functions are
shown on the Radionavigator display. Set and
adjustment them there.

Selecting an option from the main menu without a
submenu:
❒ briefly press button MODE to select the main

menu option that needs to be changed;

❒ press buttons or (with single presses) to

select the new setting;

❒ briefly press button MODE to store the new

setting and at the same time go back to the
previously selected menu option.

Selecting an option from the main menu with a
submenu:
❒ briefly press the MODE button to display the

first submenu option;

❒ press buttons or (with single presses) to

scroll through all the submenu options;

❒ briefly press the MODE button to select the

displayed submenu option and to open the
relevant settings menu;

❒ press buttons or (with single presses) to

select the new setting for this submenu option;

❒ briefly press button MODE to store the new

setting and at the same time go back to the
previously selected submenu option.

GETTING TO

KNOW YOUR CAR

SAFETY

STARTINGAND

DRIVING

WARNINGLIGHTS

ANDMESSAGES

INANEMERGENCY

SERVICINGAND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX