FIAT Bravo - Manual (Page 162)

USING THE GEARBOX
To engage the gears, press the clutch pedal fully and
put the gear lever into the required position (the
diagram is shown on the knob fig. 137, fig. 138 and
fig. 139).
To engage 6th gear (1.4 16V, 1.4 T-JET, 1.4 Turbo
MultiAir, 1.6 MultiJet, 2.0 MultiJet versions), operate
the lever by pressing it to the right in order to
avoid engaging 4th gear by mistake. The same
applies to the shift from 6th to 5th gear.
IMPORTANT Reverse can only be engaged when
the car is completely stationary. With the engine
running, wait for at least 2 seconds with the clutch
pedal fully pressed before engaging reverse to
prevent damage to the gears and grating.
To engage reverse R from neutral, lift sliding ring A
fig. 137, A fig. 138 or A fig. 139 and, at the same
time:
❒ move the lever to the right and then backwards
(1.4 16V, 1.6 MultiJet versions);
or
❒ shift the lever to the left and forward (versions
1.4 T-JET, 1.4 MultiAir, 2.0 MultiJet) fig. 139.
fig. 137 F0Q0734
fig. 138 F0Q0602 fig. 139 F0Q0783
158
GETTINGTOKNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNINGLIGHTS
ANDMESSAGES
INANEMERGENCY
SERVICINGAND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX