FIAT Bravo - Manual (Page 212)

REPLACING FUSES
INTRODUCTION
Fuses protect the electrical system: they intervene
(blow) in the event of a failure or improper
intervention on the system.
When a device does not work, check the condition
of its protective fuse: the conductor element A
fig. 185 must be intact. If it is not, replace the blown
fuse with another with the same amperage (same
colour).
B = intact fuse;
C = fuse with damaged filament.
To facilitate fuse replacement, use the pliers D
hooked inside the fuse box lid on the dashboard
left-hand side.
Refer to the tables on the following pages to
identify the protective fuse.
WARNING
If the replaced fuse blows again,
contact a Fiat Dealership.
WARNING
Never replace a fuse with metal wires
or other material.
WARNING
Never replace a fuse with another with
a higher amp rating; DANGER OF
FIRE.
fig. 185 F0Q0220
208
GETTINGTOKNOW
YOURCAR
SAFETY
STARTINGAND
DRIVING
WARNINGLIGHTS
ANDMESSAGES
IN AN
EMERGENCY
SERVICINGAND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX