FIAT Bravo - Manual (Page 117)

Start&Stop system activation
A message and a symbol will appear on the
display when the Start&Stop system is activated. In
this condition, the LED A fig. 105 on the
button
is off.
Start&Stop system deactivation
Versions with reconfigurable multifunction display:
the
symbol appears on the display when the
Start&Stop system is deactivated. The LED A
fig. 105 is on when the system is deactivated.
ENGINE STOPPING FAILURE
CONDITIONS
When the system is active, due to comfort,
emission control and safety reasons, the engine
does not stop in some conditions, among which:
❒ engine still cold;
❒ especially cold outside temperature;
❒ battery not sufficiently charged;
❒ heated rear window activated;
❒ driver's door not shut;
❒ driver's seat belt not fastened;
❒ reverse gear engaged (for example, for parking
manoeuvres);
❒ for versions equipped with dual zone automatic
climate control system (for versions/markets,
where provided), if an adequate level of thermal
comfort has not been reached or with MAX-DEF
function activation;
❒ during the first period of use, to initialise the
system.
In these cases, the display shows a message and -
for versions/markets, where provided - the symbol
flashes on the display.
WARNING
If the climate comfort is to be
favoured, the Start&Stop system can be
disabled, for a continuous operation of the
climate control system.
ENGINE RESTARTING CONDITIONS
For reasons of comfort, to limit harmful emissions
and for safety purposes, the engine can restart
automatically without any action by the driver if
certain conditions occur, including:
❒ battery not sufficiently charged;
❒ windscreen wipers working at maximum speed;
❒ reduced braking system vacuum (e.g. if the brake
pedal is pressed repeatedly);
❒ car moving (e.g. when driving on roads with a
gradient);
113
GETTING TO
KNOW YOUR CAR
SAFETY
STARTINGAND
DRIVING
WARNINGLIGHTS
ANDMESSAGES
INANEMERGENCY
SERVICINGAND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX