Cruise control – FIAT Ulysse User Manual
Page 89
GETTING TO KNOW YOUR CAR
88
To prevent the vehicle from moving
accidentally, release the handbrake
with the foot brake pedal depressed.
IMPORTANT The handbrake
lever A is fitted with a safety device
which prevents the handbrake disen-
gaging when button B is pressed with
the lever pulled. Therefore, to release
the handbrake, not only press button
B, but also pull the lever A upwards
so that the safety device is released,
then lower the lever.
When the handbrake lever is en-
gaged, if you pull button B-fig. 108
forward and then you lower the lever,
the vehicle is still braked.
CRUISE CONTROL
(where fitted) fig. 109
GENERAL
This is an electronic device (CRUISE
CONTROL) which makes it possible
to maintain vehicle cruising speed con-
stant without using any of the tradi-
tional controls except for the steer-
ing wheel. Thus, the engine taxing on
road is reduced, especially during long
journeys, because the stored speed is
maintained automatically.
IMPORTANT The Cruise Control
can only be switched on when speed
exceeds 40 km/h in 4
th
or 5
th
gear.
fig. 107
F0B0072b
fig. 108
F0B0224b
Use the speed control
system only when the
traffic or road conditions
make it possible to maintain a
constant speed for quite a long
way safely.