FIAT Ulysse User Manual

Page 75

GETTING TO KNOW YOUR CAR

N Climate control system compres-

sor on/off

O Inside air recirculation on/off.

SYSTEM OPERATION
fig. 88-89

The system can be activated in sev-

eral ways:

– turning the main fan slider clock-

wise (L);

– or pressing button A (+/–) or E

(+/–);

– or pressing one of buttons (H, I,

M);

In these three cases the system re-

stores all the operation functions
stored before turning it off.

– or pressing one of buttons B, D,

N; in this case the automatic mode is
selected;

– or pressing button G; in this case

the MAX-DEF function is selected.

The system automatically stores the

settings prior to the system switching
off, but it also takes into consideration
the vehicle stop and other external pa-
rameters, i.e.:

– if the engine is turned off for 20

minutes with the same internal tem-
perature, the system is restored keep-
ing the same settings. If in that period
temperature changes considerably, the
system restores the temperature pri-
or to switching off;

– if the engine is turned off for more

than 20 minutes, the system is
switched on in automatic mode, even
it was off before the vehicle stop, with-
out changing the temperature value.

SETTINGS fig. 88-89

The user can choose the following

options:

• wished temperature setting:

this is possible pressing button A (+/–)
or E (+/–) and checking the temper-
ature value on the display (C). It is al-
so possible to split temperature and
set different values for the driver and
the passenger; the maximum differ-
ence is 5°C.

Temperature can be increased or de-

creased by setting different steps
which can be viewed on the display:
1°C between 14°C and 18°C and be-
tween 24°C and 28°C, 0.5°C between
18°C and 24°C.