FIAT Ulysse - Manual (Page 233)

2.0 JTD
120 HP
8.8
5.8
6.9
2.0 JTD
136 HP
9.0
6.0
7.1
Consumption as per Directive 1999/100/CE (litres x 100 km)
TECHNICAL SPECIFICA
TIONS
232
FUEL
CONSUMPTION
The fuel consumption values shown
in the tables below here were defined
on the basis of the type-approval tests
specified in European Directives.
Consumption values are defined by
means of the following procedures:
– an urban cycle consisting of a
cold start and simulated drive in city
streets;
– an extra-urban cycle consisting
in frequent acceleration, in alla gears,
simulating normal conditions from 0 to
120 km/h;
– combined consumption is cal-
culated as approximately 37% of the
urban cycle and approximately 63% of
the extra-urban cycle.
IMPORTANT Road and traffic
conditions, weather, general con-
ditions of the vehicle, driving
style, fittings and accessories, use
of the climate control system,
load, roof racks and other situa-
tions penalising aerodynamic
penetration and affecting rolling
resistance will influence fuel con-
sumption rates which can be dif-
ferent from the values shown in
the table (see Cheap running that
respects the environment in
chapter Driving your car).
2.2 JTD
170 HP
9.2
6.1
7.2
Urban
Extra-urban
Combined