FIAT Ulysse User Manual

Page 38

GETTING TO KNOW YOUR CAR

Remember that in the

case of a violent collision,
back seat passengers not

wearing seat belts, in addition to
being personally exposed to se-
rious risk, also represent a seri-
ous danger to the passengers in
the front.

Make the height adjust-

ment when the car is sta-
tionary.

ADJUSTING SEAT BELT
HEIGHT fig. 57

Always adjust the height of the seat

belt to fit the person wearing it. This
could greatly reduce the risk of injury
in the case of collision. The belt is ad-
justed properly when the webbing
passes approximately halfway between
the edge of the shoulder and the neck.

Correct adjustment is obtained when

the belt passes half way between the
end of the shoulder and the neck.

Three height adjustment are possi-

ble.

To adjust, press button A (as shown

by the arrows) and raise or lower the
grip.

After you have made the

adjustment, always make
sure that the loop is at-

tached firmly in one of the fixed
positions and cannot move. To
do this, with the button released,
exert a further pressure to allow
the anchor device to catch if re-
lease did not take place at one of
the preset positions.

fig. 57

F0B0230b