Headlight washers – FIAT Ulysse User Manual

Page 210

CAR MAINTENANCE

209

Changing the rear window
wiper blade fig. 16

Proceed as follows:

– lift the rear window wiper arm A

off the glass and position the blade so
as to form a right angle with the arm;

– remove the pressure fitted blade B

following the arrow direction;

– fit the new blade in the opposite di-

rection and make sure it is properly
locked into place.

SPRAY NOZZLES

If there is no jet of liquid, first make

sure that there is liquid in the reser-
voir (see “Checking fluid levels” in this
chapter).

Then make sure that the holes in the

nozzles are not clogged up. Use a pin
for this if necessary.

HEADLIGHT
WASHERS

(where fitted) fig. 17

Regularly check that the nozzles are

intact and clean.

The headlight washers are automat-

ically switched on when the wind-
screen washer is operated and the
headlights are on.

fig. 16

F0B0177b

fig. 17

F0B0181b