FIAT Ulysse - Manual (Page 164)

IN AN EMERGENCY
163
FRONT SIDE LIGHTS fig. 15
To replace a bulb:
– Remove the cover as 2 previously
described.
– Remove the bulb holder A by turn-
ing it slightly.
– Take off the clipped bulb B and re-
place it.
– Put the bulb holder back to its
place.
MAIN BEAM HEADLIGHTS
fig. 16
To replace a bulb:
– Remove the cover as 2 previously
described.
– Disconnect the electrical connec-
tion A.
– Release clip B.
– Take off bulb C and replace it.
– Fit the new bulb by matching the
metal tab with the groove on the lamp.
– Refit clip B.
– Reconnect connector A.
DIPPED BEAM HEADLIGHTS
With halogen bulbs fig. 17
To replace a bulb proceed as follows:
– Remove the rubber cap 1 as de-
scribed previously.
– Turn the bulb holder A clockwise
or counter-clockwise to release it
from the catches.
– Remove the snap fitted bulb B and
replace it
fig. 15
F0B0135b
fig. 16
F0B0134b
fig. 17
F0B0446b