FIAT Ulysse User Manual

Page 78

GETTING TO KNOW YOUR CAR

• recirculation on: when button O

is pressed it is possible to select the
following travelling conditions: closed
recirculation (relative led on), air com-
ing from outside (led off) recirculation
open, or having the system automatic
control on (led off even if activated).

You are recommended

to use the inside air recir-
culation function in the

traffic jam (car lines inside or out-
side galleries) to prevent outside
polluted air from getting into the
vehicle. Anyway, do not use this
function when several people are
onboard, to prevent inside win-
dow misting.

• driver’s and passenger’s side

temperature alignment (MONO)
fig. 88 (for versions without ad-
ditional fans): this is possible by
pressing button D, so a single tem-
perature is reached inside the passen-
ger compartment.

• rear seat air capacity adjust-

ment (REAR) fig. 89 (for versions
without additional fans): this is pos-
sible by pressing button D, thus the
second row passengers can adjust air
capacity with the additional fan knobs
A-fig. 90. The rear fan symbol will be
viewed on the display C.

The additional fan effect depends on

the position of knobs A:

0 = additional fan with minimum ca-

pacity;

– = additional fan air capacity equal to

50% of the main fan current capacity;

AUTO = additional fan capacity

equal to the main fan capacity;

+ = additional fan air capacity equal to

70% of the main fan current capacity.

It is easier to reach the

wished air temperature
conditions with inside air

recirculation. Anyway, it is better
not to use this function in
rainy/cold days because inside
window misting may increase, es-
pecially if the compressor is off.

fig. 90

F0B0102b