FIAT Idea User Manual
Page 246
245
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
IN AN
EMERGENCY
The bulbs are arranged inside the light unit as follows:
D: sidelights / STOP
E: direction indicators
F: reversing light
G: rear fog lights
ADDITIONAL BRAKING LIGHT (THIRD STOP)
To change the bulbs, proceed as follows:
❒ open the tailgate;
❒ slacken the two fastening screws (A);
❒ press the catch (B) and remove the bulb holder;
❒ remove the snap-fitted bulbs and change them;
❒ insert the bulb holder making sure the catch (B) clicks into place;
drive in the two fastening screws (A).
IMPORTANT Where provided, on versions with dark windows, replace
the whole light unit since it is sealed.
Number plate light
To change the bulb, proceed as follows:
❒ work in the point shown by the arrow and remove the transparent (A);
❒ change the bulb(B) releasing it from the side contacts and making sure
the new bulb is correctly fastened between the contacts;
❒ refit the transparent.
F0H0190m
F0H0192m
F0H0189m