FIAT Idea User Manual

Page 233

232

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

IN AN

EMERGENCY

Please note:
❒ the jack cannot be repaired. If it breaks it must be replaced with a

new jack;

❒ no tool other than its cranking device may be fitted on the jack.
To change a wheel proceed as follows:
❒ Stop the car in a position that is not dangerous for oncoming traffic

where you can change the wheel safely. The ground should be flat and
adequately firm;

❒ Turn the engine off and pull up the handbrake;
❒ Engage first gear or reverse;
❒ Lift the luggage compartment panel mat;
❒ Loosen the fastener (A);
❒ Take the tool bag (B) and go to the wheel to be replaced;
❒ Take the space-saver spare wheel (C);
❒ If the car is fitted with alloy rims, remove the wheel hub with the

screwdriver provided levering in the groove (E), as shown in the
figure;

F0H0161m

F0H0162m