FIAT Idea User Manual

Page 237

236

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

IN AN

EMERGENCY

For versions with alloy rims
❒ Make sure that hub contact surfaces are clean;
❒ Refit the standard wheel fitting it on the pins, refit the fastening bolts

and tighten them using the wrench provided;

❒ Lower the car and remove the jack;
❒ Using the wrench provided, tighten the bolts in the sequence shown

previously for the space-saver spare wheel (see figure);

❒ Refit the snap-fitted wheel hub cap.
When you have finished
❒ Stow the spare wheel (C) in the space provided in the boot;
❒ Insert the jack partially open in its container (B) forcing it lightly to

prevent it from vibrating when travelling;

❒ Put the tools back into their places in the container;
❒ Stow the container complete with tools on the spare wheel and

secure everything with the clamping device (A);

❒ Correctly re-position the stiff cover.

F0H0161m