Schneider Electric XY2 CH User Manual

Page 8

DISMANTLING / RECYCLING

NOTE: The internal mechanism and the electrical contact blocks are fitted with springs which can result in the
projection of parts

RISK OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
• Switch off the power supply of the device.
• If the reset push button is damaged, replace it with the same type of push button.
• Check that the retaining strip is present and that it is correctly positioned to orient the reset push button.
Failure to follow these instructions will result in death or serious injury.

RISK OF PHYSICAL INJURY
• Inspect the cable in its entirety to identify the reason for the emergency stop order before restarting.
• Always check the product functioning before restarting.
Failure to follow these instructions will result in death or serious injury.

RISK OF UNINTENDED EQUIPMENT OPERATION
• Check the XY2CH installation and setting according to the information contained in this instruction

manual.

• Ensure that the cable is accessible along the entire traction zone.
• Conduct an inspection as described in the chapter entitled "Maintenance, restarting and checking" after

each. maintenance operation and before restarting the installation.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

RISK OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Switch off the power supply of the device.
Failure to follow these instructions will result in death or serious injury.

RISK OF PHYSICAL INJURY
• Dismantle the cable before the XY2CH.
• Dismantle the internal components of the XY2CH carefully.
Failure to follow these instructions will result in death or serious injury.

DANGER

WARNING

DANGER

schneider.fm Page 6 Friday, May 31, 2013 2:08 PM