Schneider Electric XY2 CH - Manual (Page 4)

2
English
EMERGENCY STOP ROPE PULL SWITCH
MECHANICAL ENDURANCE: 800,000 operating cycles
SAFETY INFORMATION:
Read these instructions carefully and look at the equipment to become familiar with the device
before trying to install, operate, or maintain it. The following special messages may appear
throughout this documentation or on the equipment to warn of potential hazards or to call attention
to information that clarifies or simplifies a procedure.
PLEASE NOTE
Electrical equipment should be installed, operated, serviced, and maintained only by qualified
personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of
the use of this equipment.
A qualified person is one who has skills and knowledge related to the construction and operation of
electrical equipment and the installation, and has received safety training to recognize and avoid the
hazards involved.
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious
injury.
WARNING indicates a potentially hazardous situation which, if not avoided, can result in death or serious
injury.
The addition of this symbol to a Danger or Warning safety label indicates that an electrical
hazard exists, which will result in physical injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey
all safety messages that follow this symbol to avoid possible injury or death.
DANGER
WARNING
schneider.fm Page 2 Friday, May 31, 2013 2:08 PM