Edimax Technology AR-7211B V2 - Manual (Page 68)

68
Field Description
delete the row.
Show Routes Clicking “Show Routes” will display the IP Route Table.
You can view a list of destination routes commonly
accessed by your network.
Static Route Table A list of the previously configured static IP routes.
Clicking Show Routes will display the following page - the table shows a list of
destination routes commonly accessed by your network.
5.6.1.2. RIP
Click RIP in the left pane and the page shown in the following figure will
appear. If you are using this device as an RIP-enabled router to communicate
with others using Routing Information Protocol (RIP) - enable RIP. This page is
used to select the interfaces on your devices which use RIP, and the version of
the protocol used.