Edimax Technology AR-7211B V2 - Manual (Page 29)

29
4.1.1.3. Dynamic IP Address
Parameter Description
VPI
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its valid
value is in the range of 0 to 255. Enter the correct VPI
provided by your ISP. By default, VPI is set to 8.
VCI
Virtual channel identifier (VCI) is the virtual channel
between two points in an ATM network. Its valid
value is in the range of 32 to 65535. (0 to 31 is
reserved for local management of ATM traffic) Enter
the correct VCI provided by your ISP. By default, VCI
is set to 35.
Connection Type Please check with your ISP the method of
multiplexing. In Bridge Mode, please select
“ADSLTYPE_ROUTER_LLC” or
“ADSLTYPE_ROUTER_VCMUX”.