Edimax Technology AR-7211B V2 - Manual (Page 37)

37
Field Description
address, subnet mask and default gateway for the
WAN connection, which is provided by your ISP.
Obtain DNS server addresses
automatically When selected, DHCP automatically assigns DNS
server address.
Use the following DNS server
addresses
When selected, you need to manually enter the
primary DNS server address and secondary DNS
server address.
Enable NAT
Check this box to enable network address
translation (NAT). If you do not select it and wish
to access the Internet normally, you must add a
route on the uplink equipment. Usually, it is
required to enable NAT.
5.2.3. 1483 Bridged
Set the encapsulation mode to LLC/SNAP and click Next to continue: