Edimax Technology AR-7211B V2 - Manual (Page 53)

53
Field Description
Bridge You can select Bridged Ethernet,
Bridged PPPoE or Disable Bridge.
AC-Name The accessed equipment type.
Service-Name The service name is displayed here.
802.1q You can select Disable or Enable. If
enabled, you need to enter the VLAN
ID. The value ranges from 0 to 4095.
Apply Changes Click to save the settings of this page
temporarily.
Return Click to return to the Channel
Configuration page.
Undo Click to refresh this page.
Source Mac address The MAC address you want to clone.
MACCLONE Click it to enable the MAC Clone
function with the MAC address that
is configured.
5.4.2.2. Auto PVC
Selecting Auto PVC in the left pane will bring you to the following page. Here,
you can configure auto PVC detection by adding or deleting items to the auto
PVC search table.