Edimax Technology AR-7211B V2 - Manual (Page 33)

33
If you log in as a common user, you can check the status of the router, but not
configure most of the settings.
5.2. Internet Connection
The Wizard page of the web-based interface allows easy configuration of the
Internet connection and other parameters. The following sections describe
the various parameters you can configure – if you wish, you can leave most of
the parameters set to their default values.
1. To begin using the wizard, click “Wizard” in the navigation bar across the
top of the screen.
Field Description
VPI
Virtual path identifier (VPI) is the virtual path between two
points in an ATM network. Its valid value is in the range of 0 to
255. Enter the correct VPI provided by your ISP. By default, VPI is
set to 8.
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is in the range of
32 to 65535. (0 to 31 is reserved for local management of ATM
traffic) Enter the correct VCI provided by your ISP. By default, VCI
is set to 35.
Click NEXT to proceed to the next page and select your Internet connection.