Edimax Technology AR-7211B V2 - Manual (Page 44)

44
Field Description
Duplex,Auto Negotiation.
MAC Address
Control
Select this to enable access control based on MAC
address. Only a host whose MAC address is listed in
the Current Allowed MAC Address Table can access
the modem.
Add
Enter a MAC address, and click “Add” to add it to the
Current Allowed MAC Address Table.
5.4.1.2. DHCP
Dynamic Host Configuration Protocol (DHCP) allows an individual PC to obtain
TCP/IP configuration from a centralized DHCP server. You can configure this
router as a DHCP server or disable it. The DHCP server can assign an IP
address, IP default gateway and DNS server to DHCP clients. This router can
also act as a surrogate DHCP server (DHCP proxy) where it relays IP address
assignment from an actual real DHCP server to clients. You can enable or
disable DHCP server or DHCP proxy.
Click DHCP in the left pane to see the following page: