Edimax Technology BR-6204WLg - Manual (Page 75)

74
The descriptions of every setup item are listed below:
Item Name Description
Enable Port Forwarding Check this box to enable Port forwarding.
IP Address Input the IP address on LAN you wish to provide
services to computers from Internet.
Protocol Select the protocol type you wish to block from
dropdown list: ‘TCP’, ‘UDP’, or ‘Both’.
Port Range Input the port range to be included in this port
forwarding rule, the port number you inputted here
will be mapped to the WAN IP address used by
this router. Please input the starting port number in
the left field, and input the ending port number in
the right field. For example, if you want to block
port 20 to 40, input ‘20’ in the left field and input
‘40’ in the right field. If you only want to block a
single port number for this rule, input the port
number in the left field.
Valid port number is from 1 to 65535.
Comment Input any descriptive text about this rule, so you
can remember the purpose of this rule. You can
input up to 20 alphanumerical characters in this
field.
Next Add the IP address and associated comment to
the list.
Cancel Discard all settings you made in this page.
All existing Port forwarding rules will be listed in ‘Current Port Forwarding
Table’:
If you want to delete one or more rule(s) listed here, check ‘Select’ box of the
rule(s) you wish to delete, then click ‘Delete Selected’ button; Click ‘Delete All’
to delete all rules. If you want to unselect all selected boxes, click ‘Reset’