Edimax Technology BR-6204WLg - Manual (Page 36)

35
Enable Mac Clone (When in Client mode) If the access point you wish
to connect only permits the connection from
certain MAC address, check this box and the
wireless interface will use the same MAC address
which wired LAN client uses.
When you finish, click ‘Next’ to continue.
7. Select the encryption mode of wireless connection:
Please select wireless encryption type from ‘Encryption’ dropdown menu. If
you select ‘None’ as encryption type, no encryption will be used and other
people will be able to read all information you transmitted by wireless network,
therefore no encryption is not recommended.
Please note that when you use encryption, all wireless clients should use the
same encryption mode and setting.