Edimax Technology IC-3115W - Manual (Page 92)

91
9.6 Scan
If you have more than one camera configured, and you wish to switch the
display image between cameras, you can click the ‘Scan’ button to switch
between all configured cameras.
Click the ‘Scan’ button once to activate the scan function (the scan icon will
become blue
), click again to stop scanning (the scan icon will become white
).
NOTE: If a camera is configured but disconnected, it will still be
displayed in a scan sequence (you ’ll see nothing and you’ll see the
text ‘Disconnected’ at the upper-left corner of the display image).