Edimax Technology IC-3115W - Manual (Page 46)

45
User Name Input the user name required by the FTP
server.
Password Input the password of the FTP server.
Port Input the port number of the FTP server,
this should an integer between 1 and
65535.
Please don’t change this value unless so
instructed by the FTP server’s
administrator.
Path Input the path (folder) you wish to save
snapshot files to on the FTP server. If you
don’t want to specify a folder, you can
leave this field blank, and snapshot files
will be saved in the default root folder on
the FTP server.
Passive mode Default setting is ‘Enable’ (use passive
mode). If the FTP server you’re going to
use does not support passive mode (using
active mode), select ‘Disable’ here.
Click the ‘Apply’ button to save changes you made. You can also click the ‘Send a
test file’ button to upload a test file to the FTP server, and a message box will
appear to indicate if the FTP upload was successful, so you can determine if the
parameters you set in this page are correct.