Edimax Technology IC-3115W - Manual (Page 44)

43
Move the mouse to a corner or the middle
of an edge of the motion detection
rectangle, and click and drag the mouse.
To move the motion detection area:
Position the mouse within the motion
detection area, and click and drag the
mouse.
Sensitivity Change the sensitivity of motion detection.
Set to a higher value (right) and the
network camera will trigger the alarm
when there are only small changes in
video. If you find that the network camera
sends emails or uploads pictures to FTP
too frequently, and there’s nothing
happening in the snapshot, you can set this
to a lower value.
Threshold Set the motion detection threshold here
(input number 0 to 100). A higher value
means the network camera will only
trigger an alarm when the object in the
motion detection area is really big.
Refresh Refresh the reference picture.
Save Save changes you made in this page.