Edimax Technology IC-3115W - Manual (Page 26)

25
select B, G, or N only, then the network
camera will be able to communicate with
wireless networks of the same operating
mode only.
Band Select wireless band: 20MHz only or
20/40MHz auto switch. It’s recommended
to select ‘Auto 20/40MHz’.
Available
Networks The network camera will list all nearby
networks and their parameters in this
field. If the network you wish to connect to
does not appear here, click ‘Refresh’ to
rescan again. You can click ‘Refresh’ button
as many times as you wish, until the
network you wish to connect to appears in
the list.
If you wish to connect to a specific
network, select the radio button of the
network you wish to connect to (under the
‘Connect’ field), and the network’s
connection parameter will appear in the
fields below.
Tips: If you can’t see the network you wish
to connect to, even after refreshing many
times, please move the network camera
closer to the network’s access point).
SSID Input the network’s SSID (access point’s
wireless name) here, or select a network
from the network list above.
If the network you wish to connect to is a
‘hidden’ network (SSID is hidden from the
public), you will have to input the SSID
manually.
Channel Select a wireless channel number. Use
‘Auto’ to select a channel automatically.