Edimax Technology IC-3115W - Manual (Page 140)

139
10.4 Troubleshooting
Please don’t panic if you find this network camera is not working properly.
Before you send this network camera back to us, you can do some simple
checks to save your time:
Problem description
Possible solution(s)
Can’t connect to the
network camera 1) Please check the IP address of the network
camera again.
2) Please make sure the network cable is correctly
connected to your local area network.
3) Please make sure power cable is correctly
connected to the network camera.
4) Please make sure the network camera is
switched on (the LED lights on the network
camera will light up), if LED lights are not
switched off in the configuration menu (System
-> Basic -> LED light).
No network camera found 1) The ‘auto search’ function only works on
network cameras located on local area network.
No image 1) If the place where the network camera is
installed is too dark, try to add some lights
when possible.
2) Check if there’s anything covering the lens.