Edimax Technology BR-6214K - Manual (Page 33)

32
2.5.5 Static Routing
This router provides Static Routing function when NAT is disabled. With Static Routing, the router can forward packets
according to your routing rules. The IP sharing function will not work anymore in Static Routing mode.
Note: The DMZ function of firewall will not work if static routing is enabled.
Parameter Description
Route The network address of destination LAN.
Route Mask
The subnet mask of destination LAN.
Next Hop IP
The next stop gateway of the path toward the destination LAN. This is the IP of the
neighbor router that this router should communicate with on the path to the destination
LAN.
Interface
The interface that go to the next hop (router).
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)
2.6 Firewall
The Broadband router provides extensive firewall protection by restricting connection parameters, thus limiting the risk of
hacker attack, and defending against a wide array of common Internet attacks. However, for applications that require
unrestricted access to the Internet, you can configure a specific client/server as a Demilitarized Zone (DMZ).
Note: To enable the Firewall settings select Enable and click Apply