Edimax Technology BR-6214K - Manual (Page 16)

15
1.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP should provide all the
information required in this section.
Parameter Description
Obtain an IP address The ISP requires you to obtain an IP address by DHCP server before connecting
automatically to the PPTP server.
Use the following
The ISP give you a static IP to be used to connect to the PPTP server.
IP address
IP Address
This is the IP address that your ISP has given you to establish a PPTP connection
.
Subnet Mask
Enter the Subnet Mask provided by your ISP
(e.g. 255.255.255.0)
Gateway
Enter the IP address of the ISP Gateway
PPTP Server
If your LAN has a PPTP gateway, then enter that PPTP gateway IP address here. If you
do not have a PPTP gateway then enter the ISP’s Gateway IP address above
Login ID
Enter the User Name provided by your ISP for the PPTP connection. Sometimes called a
Connection ID
Password
Enter the Password provided by your ISP for the PPTP connection
MTU
This is optional. You can specify the maximum size of your transmission packet to the
Internet. Leave it as it is if you don’t want to set a maximum packet size.
Silent Timeout
If specified a non-zero value, gateway disconnects this session after specified idle time.
Dial On Demand
If checked, gateway won’t dial this session until received a packet that requested Internet
access. If unchecked, gateway dials this session immediately after system powered up.
Auto Reconnect
If checked, gateway redials this session if session previously terminated by ISP.
BEZEQ-ISRAEL
Select this item if you are using the service provided by BEZEQ in Israel.
Auth Type
Select PAP or CHAP for the authentication type requested by your ISP.