Edimax Technology BR-6214K - Manual (Page 21)

20
Parameters Description
Account Enter your account name to login to your Broadband router.
Password
Enter your password
Retype your
Enter your password again for verification purposes
Password
Note: If you forget your password, you’ll have to reset the router to the factory default
(password is 1234) with the reset button (see router’s back panel)
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)
2.1.3 Remote Management
The remote management function allows you to designate a host range in the Internet the ability to configure the
Broadband router from a remote site. Enter the designated host IP Addresses in the IP Address field.
Parameters Description
IP Address Please specify the IP range to the Remote Management IP fields. All the Internet IPs
that inside this range can manage this router from WAN side.
Port
To avoid conflict of virtual server at port 80, user can specify a different port in Remote
Management Port for WAN side access.
Ping from WAN side
Ping from WAN side is turned on by default and could be turned off if the Enable
checkbox is unchecked.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)