Edimax Technology BR-6214K User Manual

Page 15

Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for
the Static IP Address connection. You can start using the router now, if you wish to use some of the advance features
supported by this router see chapter 2, 3, 4.

1.3 PPPoE

Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all the
information required in this section.

Parameter

Description

Enter the Login ID provided by your ISP for the PPPoE connection

Password

Enter the Password provided by your ISP for the PPPoE connection

Service Name

This is optional. Enter the Service name should your ISP requires it, otherwise leave it
blank.

AC Name

This is optional. Enter the AC Name should your ISP requires it, otherwise leave it blank.

MTU

This is optional. You can specify the maximum size of your transmission packet to the
Internet. Leave it as it is if you don’t want to set a maximum packet size.

Dial On Demand

If checked, gateway won’t dial this session until received a packet that requested Internet
access. If unchecked, gateway dials this session immediately after system powered up.

Silent Timeout

If specified a non-zero value, gateway disconnects this session after specified idle time.

Auto Reconnect

If checked, gateway redials this session if session previously terminated by ISP.

Auth Type

Select PAP or CHAP for the authentication type requested by your ISP.

Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for
the PPPoE connection. You can start using the router now, if you wish to use some of the advance features supported by
this router see chapter 2, 3, 4.