Edimax Technology BR-6214K - Manual (Page 31)

30
Note: Individual port numbers are separated by a comma (e.g. 47624, 5775, 6541
etc.). To input a port range use a “dash” to separate the two port number range (e.g.
2300-2400)
Trigger Type
Select whether the outbound port protocol is “TCP”, “UDP” or both.
Trigger Start/Finish Range
This is the out-going (Outbound) range of port numbers for this particular
application
Enable
Enable the specified Special Application function.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)
Example: Special Applications
If you need to run applications that require multiple connections, specify the port (outbound) normally associated with
that application in the "Trigger Port" field. Then select the protocol type (TCP or UDP) and enter the public ports
associated with the trigger port to open them up for inbound traffic.
Example:
Name
Incoming
Type
Incoming Port Range
Trigger
Type Trigger Start
Port Trigger Finish
Port
Enable
MSN Game
Zone
TCP 2300-2400, 47624 UDP 28800 28800
MSN Game
Zone
Battle.net UDP 6112 UDP 6112 6112 Battle.net
In the example above, when a user trigger’s port 28800 (outbound) for MSN Game Zone then the router will allow
incoming packets for ports 2300-2400 and 47624 to be directed to that user.
Note: Only one LAN client can use a particular special application at a time.
2.5.3 ALG Settings
You can select applications that need “Application Layer Gateway” to support.