Cabling the v7111 24-port – 3Com V7111 User Manual
Page 21
7
Use four standard rack screws to attach the device to the rack. These screws are not
provided with the device.
Figure 11
V7111 24-PORT with Brackets for Rack Installation
Cabling the V7111 24-PORT
illustrates the rear panel of the V7111 24-PORT. For descriptions of the V7111 24-
PORT rear panel components, see
Cable your V7111 24-PORT according to each section of
.
Figure 12
V7111 24-PORT (FXS) Rear Panel Connectors
2
6
1
3
4
5
Table 6
V7111 24-PORT Rear Panel Component Descriptions
Item #
Label
Component Description
1
Protective earthing screw (mandatory for all installations).
100-250 V~
50 - 60 Hz 2A
2
AC power supply socket.
3
ANALOG LINES 1 –24
50-pin Telco for 1 to 24 analog lines.
4
Data Cntrl Ready
5
RS-232
9 pin RS-232 status port.
6
Eth 1 Eth 2
Dual 10/100 Base-TX Ethernet connections.
3Com VCX V7111 Analog Gateway Installation Guide
21