Sending reports via e-mail, From the front panel, Using centreware is – Xerox Phaser 860 User Manual
Page 35
Networking Setup Guide
29
Printer Management
Sending Reports via E-mail
From the Front Panel
Note
To send Usage Profile reports via e-mail, the printer must be properly set up via
CentreWare IS. For more information, see Setting up Usage Profile Reporting on
1.
With
Menus
highlighted, press the OK key.
2.
Scroll to
Support Menu
by pressing the Scroll Up or Scroll Down key.
3.
Press the OK key.
4.
Scroll to
Usage Profile Menu
.
5.
Press the OK key.
6.
Scroll to
Email Full Report
or
Email Job Report
.
7.
Press the OK key.
8.
To exit the menu system, scroll to
Exit
and press the OK key.
Using CentreWare IS
Note
To send Usage Profile reports via e-mail, the MaiLinX must be properly set up
via CentreWare IS. For more information, see Setting up Usage Profile Reporting
1.
Connect to the printer via CentreWare IS (see page 23).
2.
On the right side of the main page, click Jobs.
3.
On the left side of the page, click Usage Profile.
4.
Enter the desired e-mail address in the Send to Specific Address field.
5.
Click Send Usage Profile Report.