Xerox Phaser 860 - Manual (Page 31)

Networking Setup Guide 25
Printer Management
Intelligent Ready
Intelligent Ready is an automated system that monitors the printer’s usage and warms up
the printer when you are most likely to need it. You can turn Intelligent Ready on or off
from the printer’s front panel. CentreWare IS provides full control of the printer’s
automatic warm-up and standby settings.
Enabling and Disabling Intelligent Ready From the Front Panel
To turn Intelligent Ready mode on or off, on the front panel:
1. With
Menus
highlighted, press the OK key.
2. Scroll to
Printer Setup Menu
by pressing the Scroll Up or Scroll Down key.
3. Press the OK key.
4. Scroll to
Intelligent Ready
.
5. Press the OK key.
6. Scroll to display either
On
or
Off
.
7. Press the OK key.
8. To exit the menu system, scroll to
Exit
and press the OK key.
Setting up Intelligent Ready Using CentreWare IS
1. Connect to the printer via CentreWare IS (see page 23).
2. On the right side of the page, click Properties.
3. In the General group, click Warm-up.
4. Follow the instructions on the page to set up Intelligent Ready or standby settings.
5. Click Save Changes to save your changes.