Xerox Phaser 860 - Manual (Page 21)

Networking Setup Guide 15
Setting the Printer’s IP Address
Setting the IP Address From the Front Panel
1. With
Menus
highlighted, press the OK key.
2. Press the Scroll Down key to scroll to the
Network Setup Menu
.
3. Press the OK key.
4. Scroll to
TCP/IP Address
.
5. Press the OK key.
6. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first
digit of the address, then press the OK key to accept that digit.
7. Repeat step 5 for each remaining digit.
8. Scroll to
TCP/IP Network Mask
.
9. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first
digit of the address, then press the OK key to accept that digit.
10. Repeat step 9 for each remaining digit.
11. Scroll to
TCP/IP Gateway
.
12. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first
digit of the address, then press the OK key to accept that digit.
13. Repeat step 12 for each remaining digit.
14. To exit the menu system, scroll to
Exit
and press the OK key.