beautypg.com

Ignition switch, Hour meter, Choke control – Yazoo/Kees ZMKW48172 User Manual

Page 26: Controls

background image

CONTROLS

English

-

26

Ignition Switch

The ignition switch is placed on the driver’s control

panel and is used to start and stop the engine.

8050-140

Hour meter

8011-521

Ignition switch and hour meter

8011-508

Choke control

Hour Meter

The hour meter displays the total operating time.
It will flash CHG OIL (Change Oil) at 50 hour intervals.

The flash duration is one hour before and one hour

after the interval. The CHG OIL icon will come on

and shut off automatically. The hour meter cannot be

manually reset.

IMpORTANT INfORMATION

Do not run the starter for more than five

seconds each time. If the engine does not

start, wait about 10 seconds before retrying.

Choke Control

The choke mode is used for cold starts in order to

provide the engine with a richer fuel mixture.
For cold starts, the control should be pulled out to its

extent.

This manual is related to the following products: