Yazoo/Kees ZMKW48172 - Manual (Page 23)

CONTROLS
English - 23
Motion Control Levers
The machine’s speed and direction are continuously
variable using the two steering controls. The steering
controls can be moved forward or backward about
a neutral position. Furthermore, there is a neutral
position, which is locked if the steering controls are
moved outward.
When both controls are in the neutral position (N), the
machine stands still.
By moving both controls an equal amount forward or
backward, the machine moves in a straight line forward
or backward respectively.
In order, for example, to turn right while moving
forward, move the right control towards the neutral
position. The rotation of the right wheel is reduced and
the machine turns to the right.
Zero turn can be achieved by moving one control
backward (behind the neutral position) and carefully
moving the other steering control forward from its
neutral position. The rotation direction when zero
turning is determined by which steering control is
moved backward behind the neutral position. If the left
steering control is pulled backward, the machine turns
to the left. Use extra care when using this maneuver.
8011-788
Steering controls
Motion control lever pattern (right side)
Forward
Neutral
Neutral
Lock
Reverse
CAUTION!
The machine can turn very rapidly if one
steering control is moved significantly
further forward than the other.