Xerox DC 545 - Manual (Page 2)

dc02cc0304
Page 2 Document Centre Technical Support Operations
Print Features
The Document Centre supports PostScript level 2 and 3 commands or PCL5e and PCL6
escape sequences that enable the features listed in the following table.
Feature Description
Job Name Allows you to specify a job name.
Job Owner Allows you to specify a job owner.
Media Size Allows you to select media size.
Media Source Allows you to select the paper tray that feeds a print job.
Media Type Allows you to select type to media used to print a job.
Media Color Allows you to select the color of media used to print a job.
Output Location Allows you to select the output location where a job is delivered.
Stapling Indicates stapling for a print job.
Hole Punching Indicates hole drilling/punching after print job completes.
Collation Allows you to select the order of the output. Collated creates a set
that includes 1 copy of each page. Uncollated creates a stack of
multiple copies of the same page.
Resolution Allows you to select the resolution used to image a job. Currently,
600 x 600 x 1 (600 dpi resolution with 2 gray levels), 600 x 600 x 2
(600 dpi resolution with 4 gray levels), 1200 x 1200, and 1800 x
1800 are available.
Quantity Allows you to select the number of sets to print.
Simplex Delivers one-sided output.
Duplex Long Edge Binding Delivers two-sided output. Landscape documents read like a
calendar, and Portrait documents read like a book.
Duplex Short Edge Binding Delivers two-sided output. Landscape documents read like a book
and Portrait documents read like a calendar.
Orientation Allows you to select portrait or landscape orientation.
Forcing Short-Edge Feed Allow you to force some media sizes to print with the short-edge
of the paper fed first.
Front Cover Imaged/Unimaged Allows you to select a blank or imaged front cover.
Front Cover Media Type Allows you to select media type for the front cover.
Front Cover Media Color Allows you to select media color for the front cover.
Front and Back Cover
Imaged/Unimaged Allows you to select blank or imaged front and back covers.
Front and Back Cover Media Type Allows you to select the media type for the front and back covers.
Front and Back Cover Media
Color Allows you to select the media color for the front and back cover.
Accounting Allows you to enter an accounting code and UserID to track
printer usage.
NOTE: This feature requires the optional Network Accounting kit.
Draft Mode Printing Allows you to select draft printing mode that conserves toner
when printing.
Image Quality Selection Allows you to increase or decrease the amount of toner used to
create an image. Image quality levels range from 1 (darkest) to 7
(lightest).
Job Type Allows you to select normal print, secure print, or proof print. Proof
print is the same as sample set.
NOTE:
The Secure Print
feature is not
referenced in this
document. This
feature requires the
encryption scheme
that encodes the
secure print password
and is Xerox Private
Data.