ZyXEL Communications Prestige 650H-E Series - Manual (Page 22)

Prestige 650H-E
22
Figure 20 Rule Summary
The following table describes the labels in this screen.
Table 6 Rule Summary
LABEL DESCRIPTION
The default action
for packets not
matching following
rules Should packets that do not match the following rules be blocked or forwarded? Make your
choice from the drop down list box. Note that “block” means the firewall silently discards
the packet.
Default Permit Log Click this check box to log all matched rules in the ACL default set.
The following read-only fields summarize the rules you have created that apply to traffic traveling in the selected
packet direction. The firewall rules that you configure (summarized below) take priority over the general firewall
action settings above.
No. This is your firewall rule number. The ordering of your rules is important as rules are
applied in turn. The Move field below allows you to reorder your rules.
Source IP This drop-down list box displays the source addresses or ranges of addresses to which
this firewall rule applies. Please note that a blank source or destination address is
equivalent to Any.