Xerox 50 LP/ST - Manual (Page 32)

2-8 Network Software
Configuring Printer Connectivity Settings
Click Settings on the main window to display the printer connectivity settings
tabs.
The Network tab is used to modify printer network settings such as Network
Type, Frame Type, and Connection Type. The TCP/IP, NetWare, Microsoft
Networks, and AppleTalk tabs are used to modify printer settings that are
specific to those network environments.
Detailed, step-by-step instructions for using Printer Admin Services to install
and set up a printer are provided in the appropriate network installation
chapters of this guide.
To remain in the Settings dialog after making changes to the connectivity
settings, click Apply. To return to the main window after making changes to
the connectivity settings, click OK.
Note: Whenever changes are made to the printer connectivity settings, the
printer must be powered off and back on in order for the pending changes to
take effect.