York D2CG - Manual (Page 18)

036-21359-001-B-0302
18 Unitary Products Group
5. HIGH ALTITUDE - PROPANE GAS - Contains orifices
required for applications between 2000 and 6000
feet altitude. Must be used with propane conver-
sion kit.
6. BURGLAR BARS - Designed to work with above
roofcurbs, depending on unit model. Fits duct
openings of curb supply and return air openings.
7. SIDE DUCT FLANGE - Supply and return air duct
flanges for side duct applications. Do not use on
units with power exhaust.
8. HIGH SPEED DRIVE - Includes blower pulley and
belt for higher CFM and/or static pressure require-
ments.
9. WOOD SKID - Allows unit to be handled with 90"
forks.
10. ECONOMIZER/MOTORIZED DAMPER RAIN HOOD
(DCE/CG300 only)
- Contains all hood panels and
the hardware for assembling.
11. THERMOSTATS - Multiple models available from
A.C.O., M.C.O., Electronic or Electrical Mechanical
versions.
12. ANTI-RECYCLE TIMER - Assures 5-minute off-time
between compressor cycles.
13. LOW AMBIENT KIT - Provides unit cooling opera-
tion down to 0°F.
OTHER FACTORY INSTALLED OPTIONS
1 POWER EXHAUST OPTION - To work in conjunc-
tion with economizers.
2. TECHNICOAT PHENOLIC COATED COND. COIL
3. ELECTRONIC ENTHALPY ECONOMIZER
4. DUAL INPUT ELECTRONIC ENTHALPY ECON-
OMIZER