Xerox DocuPrint P1202 - Manual (Page 19)

DocuPrint P1202 User Guide
1-19
E
NGL
I
S
H
Installing Software from Diskette
PCL Printer Drivers
The following instructions specify the PCL 6 driver. To install
the PCL 5e driver, substitute PCL 5e for PCL 6 in the
instructions.
Windows 95/98
1. Insert the diskette “DocuPrint P1202 PCL 6 Driver.”
2. From the Start menu, select Settings➔Printers.
3. Double-click Add Printer. Click Next.
4. Select Local Printer. Click Next.
5. Click Have Disk.
6. In the field Copy manufacturer’s files from:, type A:\
then click OK.
7. Select Xerox DocuPrint P1202 PCL 6. Click Next.
8. Select the port (by default LPT1:). Click Next.
9. Xerox recommends that the PCL 6 driver be the default
driver. Click Next.
10. Click Finish.
Windows NT 4.0
1. Insert the diskette “DocuPrint P1202 PCL 6 Driver.”
2. From the Start menu, select Settings➔Printers.
3. Double-click Add Printer.
4. Select My Computer. Click Next.
5. Select the port (by default LPT1:). Click Next.
6. Click Have Disk.
7. In the field Copy manufacturer’s files from:, type A:\
then click OK.
8. Select Xerox DocuPrint P1202 PCL 6. Click Next.
9. Xerox recommends that the PCL 6 driver be the default
driver. Click Next.
10. Decide whether you want to share this printer or not.
Then click Next.
11. Click Finish.
Windows 3.1x
1. Insert the diskette “DocuPrint P1202 PCL 6 Driver.”
2. Open Main➔Control➔Printers.
3. Click Add.
4. In List of Printers: highlight Install Unlisted or
Updated Printer and click Install.
5. In the field Insert unlisted, updated, or
vendor-provided printer driver disk in:, type A:\ then
click OK.
6. Select Xerox DocuPrint P1202 PCL 6. Click OK.
7. Xerox recommends that the PCL 6 driver be the default
driver. Highlight the driver and click Set as Default
Printer.
8. Click Close.
RCP and SM
Windows 95/98 and NT 4.0
1. Insert the diskette “DocuPrint P1202 RCP/SM.”
Note: RCP only for Windows NT 4.0.
2. From the Start menu, select Run.
3. Type a:\setup.exe. Click OK.
4. Follow on-screen instructions.
Windows 3.1x
1. Insert the diskette “DocuPrint P1202 RCP/SM.”
2. Open the Program Manager and select Run from the
File menu.
3. Type a:\setup.exe. Press Enter.
Xerox Font Manager
Windows 95/98 and NT 4.0
1. Insert the diskette “DocuPrint P1202 Xerox Font
Manager.”
2. From the Start menu, select Run.
3. Type a:\install.exe. Click OK.
4. Follow on-screen instructions.
Windows 3.1x
1. Insert the diskette “DocuPrint P1202 Xerox Font
Manager.”
2. Open the Program Manager and select Run from the
File menu.
3. Type a:\install.exe. Press Enter.
USB Port Driver (Windows 98 only)
1. Insert the diskette “DocuPrint P1202 USB Port Driver.”
2. From the Start menu, select Run.
3. Type a:\setup.exe. Click OK.
4. Follow on-screen instructions.