Xerox DocuPrint P1202 - Manual (Page 17)

DocuPrint P1202 User Guide
1-17
E
NGL
I
S
H
Installing Memory
1
Turn off power and disconnect
the power cable.
4
Install memory SIMM into
second slot labeled “DRAM” as
shown, slightly angled, notch
side up.
5
Push back on the SIMM until it
clicks into place.
6
OPE N
CLO SE
Reinsert metal plate.
7
Replace control board cover.
8
Reconnect power cable and turn
on power.
Print a configuration sheet (hold
down control button until all
lights blink, then release).
Confirm new memory value on
sheet.
2
Open control board cover.
3
OPE N
CLO SE
Remove metal plate.