Xerox DocuPrint P1202 - Manual (Page 18)

DocuPrint P1202 User Guide
1-18
EN
G
L
I
S
H
Making Installation Diskettes
Use the following procedures to copy software installation files from the Xerox DocuPrint P1202
CD-ROM onto floppy diskettes for installation onto computers that do not have a CD-ROM drive or
Internet access. To install the software, see “Installing Software from Diskette“ (page 1-19).
PCL 6 Printer Driver
1 Label a new or freshly formatted diskette
“DocuPrint P1202 PCL 6 Driver” and insert it
into the floppy drive.
2 Windows 95/98 and 3.1x:
Copy d:\XX\pcldrv\pcl6\win9x3x\*.* a:\
(where “d” is the CD-ROM drive letter, XX is the
language code
1 , i.e. EN for English, and “a” is
the floppy drive letter).
Windows NT 4.0:
Copy d:\XX\pcldrv\pcl6\winNT\*.* a:\
(where “d” is the CD-ROM drive letter, XX is the
language code
1
, i.e. EN for English, and “a” is
the floppy drive letter).
RCP/SM
1 Windows 95/98 and 3.1x:
Label a new or freshly formatted diskette
“DocuPrint P1202 RCP/SM” and insert it into
the floppy drive.
Windows NT 4.0:
Label a new or freshly formatted diskette
“DocuPrint P1202 RCP” and insert it into the
floppy drive.
2 Copy d:\XX\rcp_sm\*.* a:\
where “d” is the CD-ROM drive letter, XX is the
language code
1
, i.e. EN for English, and “a” is
the floppy drive letter).
1 Refer to the table on the last page for language codes.
PCL 5e Printer Driver
1 Label a new or freshly formatted diskette
“DocuPrint P1202 PCL 5e Driver” and insert it
into the floppy drive.
2 Windows 95/98 and 3.1x:
Copy d:\XX\pcldrv\pcl5e\win9x3x\*.* a:\
(where “d” is the CD-ROM drive letter, language
is the language code
1 , i.e. EN for English, and
“a” is the floppy drive letter).
Windows NT 4.0:
Copy d:\XX\pcldrv\pcl5e\winNT\*.* a:\
(where “d” is the CD-ROM drive letter, XX is the
language code
1
, i.e. EN for English, and “a” is
the floppy drive letter).
Xerox Font Manager
1 Label a new or freshly formatted diskette
“DocuPrint P1202 Xerox Font Manager” and
insert it into the floppy drive.
2 Copy d:\XX\font\*.* a:\ where “d” is the
CD-ROM drive letter, XX is the language code
1
,
i.e. EN for English, and “a” is the floppy drive
letter).
USB Port Driver
(Windows 98 only)
1 Label a new or freshly formatted diskette
“DocuPrint P1202 USB Port Driver” and insert it
into the drive.
2 Copy d:\XX\usb\*.* a:\ where “d” is the
CD-ROM drive letter, XX is the language code
1
,
i.e. EN for English, and “a” is the floppy drive
letter).